Gila Tools high performance T-Charger Turbo Diamond Blades are designed to cut faster smoother and longer. Hi-grade diamond powder provide the highest leverl of performance for every application. Uniquely designed deep drop segments allow for abrasian resistance and protects the blade from undercutting.
- For use with Angle Grinder, Circular Saw
- Ideal for cutting Concrete, Brick, Block, Masonry
- Great for dry and wet cutting
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
For proper size, seg width, seg height and arbor, view product table
- Arbor Size: 7/8"-5/8" DM7/8in-5/8in
- Blade Diameter: 4"-8"
- Material Cut: Concrete, Brick, Block, Masonry
- Rim Type: Segmented
- Weld Type: Hot Pressed Castellated
Works with the following Manufacturer Models:
MK Diamond: MK-S, MK-70,
CS Unitec: EDS181
* Use Gila Flush Mount Adapter for use with Angle Grinders
Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D
Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S
Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497
Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30
Ridgid: R1005, R1020
Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520
Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS, CM5SB, CM4SB2
Ryobi: AG452K, AG402, AG700
Craftsman: 24544, 26438, 24543
Skil: 9296-01, 9295-01