Details
The Gila Tools Plywood, OSB and Chipboard Steel Saw Blades are designed to provide chip-free edges. The combination of tooth design makes these the ultimate blades for finishing. Blade is coated to reduce friction and rusting that guarantee a long life.
Features:
- High tooth count, cuts flawless chip-free edges in Plywood, OSB, Chipboard and Laminates
- Blade coating that reduces heat and friction build up and prevents rust for longer blade life
- Hardened steel body prevents blade from warping and binding
- Produces clean crosscuts and in hard and soft woods
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
Specifications
- Diameter: 6-1/2", 7-1/4", 10"
- Machine Use: Miter Saws, Circular Saws, Table Saws.
- Application: Plywood, OSB, Veneer, Chipboard, Thin Plastic
- Teeth: 150 & 200
- Arbor: 5/8"
- Kerf: 1.6 & 2.4
- Hook Angle:
Compatible with the following Tools.
Bosch: GCM12SD, 4310, 4405, 3912, 5312, CM12, 4100, 4100-09, 4100DG-09, GTS1031, CS5, CS10
Makita: LS1216L, LS1016L, LS1016, LS0714, LS1040F, LS1221, LS1040, 2705, 5007FA, 5007F, 5477NB, 5008MGA, 5377MG, 5007MGA, 5740NB, BSS501, BSS610
Dewalt: DWS780, DW716, DW717, DW713, DW715, DW718, DW712, DW745, DW744X, DCS373M2, DWE575SB, DWE575, DWS535, DWS535T, DW364, DW378GT, DW367, DW384, DCS391L1, DCS390L, DC300K, DC390K
Milwaukee: 6950-20, 6955-20, 6480-20, 2630-22, 6390-21, 6391-21, 6470-21, 0730-22, 6477-20, 6390-20, 6577-20
Porter Cable: PC136MS, PCB120MS, PCB220TS, PCB270TS, PC18CSL, PC13CSL, PC15CSLK, PC15TCSMK
Jet: 707110, 707120, 707100, 708675PK, 708674PK, 708677PK, 708676PK, 708679PK, 708678PK, 708492K, 708493K, 708494K, 708495K
Ridgid: R4110, MS255SR, R410, MS1290LZA, R4510, R4512, R3202, R3203, R3210, R3400, R865N
Ryobi: P551, TS1141L, TSS101L, RTS10, RTS20, RTS30
Skil: 3820, 3316, 3410, 3310, MAG77-75, 5995, 5680-02, 5480, SHD77M, SHD77-72, SHD77, HD5860, HD5687M-01, HD5687-01, 5780-01, 5680-01, 5580, 5480-01
Metabo: 6.02268.42, 6.02268.85
Panasonic: EY4542LR2M
Black & Decker: CS1014, CS1015
Hitachi: C10FCE2, C10FCH2, C10FSB, C10FSH, C12FCH, C12FDH, C12LCH, C12LDH, C12LSH, C12RSH, C18DL, C18DLP4, C18DSLP4, C7SB2, C7BMR, C7ST
Powermatic: 1720305K, 1791229K, 1791230K, 1792000K, 1792001K, 1792002K, 1792003K, 1792005K, 1792006K, 1792007K, 1792008K, 1792010K, 1792011K, 1792012K, 1792013K, SLR12
Delta: 36-L336, 36-L352, 36-L552, 36-L552LVC
Sawstop: PCS31230-PF30, PCS31230-TGP252, PCS175-TGP252, PCS31230-TGP236, PCS175-TGP236, PCS175-PFA30, CNS175-TGP36, CNS175-SFA30, CNS175-TGP52
Grizzly: G0713, G0661, G1023RL, G1023RLW, G1023RLX, G0691, G0690, G1023RLWX, G0652, G0623X3, G0651, G0715P, G0623X, G0623X, G0700, G0696X, G0697X, G0606X1, G0605X1, G0699, G0588, G0674, G0493, G0501, G0502, G0732, G0524
Steel City: 35637, 35990C, 35990G, 35960, 35965GR, 35965, 35960GR, 35970, 35970GR, 35975, 35975GR, 35990CS, 35975G, 35950G, 35990CG, 35950, 35926, 35955, 35955G
Rockwell: RK7241S, RK3434
Craftsman: 21807, 21833, 34972, 28463, 28461, 21829, 21828, 22116, 11585, 11578