Gila Miter Saw blades are with TCG grind are designed for burr-free cuts in non ferrous metals and aluminum. Blades can be used to cut Plastics, PVC, Fiberglass, Acrylics and more. Thin kerf saw blades provide exceptional finish while reducing waste in more expensive materials.
These blades are ideal for the following miter saw types:
- Single Bevel Slide Miter Saws
- Single Bevel Compound Miter Saws
- Dual Bevel Slide Miter Saws
- Sliding Compound Miter Saws and Miter Box saws.
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
Compatible with the following miter saws.
Bosch: GCM12SD, 4310, 4405, 3912, 5312, CM12
Makita: LS1216L, LS1016L, LS1016, LS0714, LS1040F, LS1221, LS1040
Dewalt: DWS780, DW716, DW717, DW713, DW715, DW718, DW712
Milwaukee: 6950-20, 6955-20
Porter Cable: PC136MS, PCB120MS
Jet: 707110, 707120, 707100
Ridgid: R4110, MS255SR, R410, MS1290LZA
Ryobi: P551, TS1141L, TSS101L
Skil: 3820, 3316
Hitachi: C10FCE2, C10FCH2, C10FSB, C10FSH, C12FCH, C12FDH, C12LCH, C12LDH, C12LSH, C12RSH
Craftsman: 21237, M2500RC3, 1725CMSW, SM3055RC, 21226, 10CMSPW, 825CMSMPCRAFT, 21201, 21235, 21205