Are you new to woodworking or DIY construction, and are having a hard time choosing the right diamond blade for your next project? Don’t fret; we at GilaTools will help you with your dilemma. Below is a list of key tips that can help you choose the right diamond blade for your cutting job.

How hard are the materials you’re cutting?

Each blade is designed to cut different materials, depending on the hardness of the metal bond and the quality of the diamond used. But if you want your diamonds to last long and give optimal performance, you should look for a blade intended for the material you’re going to cut. Know what makes up the material you’re going to cut, whether it’s asphalt or concrete. You can also ask the retailer shop for material charts, which can help you identify which diamond blade is perfect for the material your cutting.

Which type of saw equipment are you using?

When choosing a diamond blade, it should be compatible with the saw equipment you’re using. Is it a 70-hp flat saw or a 5-hp power cutter? Using the wrong blade for your saw equipment can cause issues and problems, or worse, can damage not only the diamond blade but the equipment you are using.

What’s the cutting depth of your project?

Remember to consider the cutting depth before choosing a diamond blade. Most diamond blades include maximum cutting depths printed on their label. But remember that the actual cutting depth will vary with the diameter of the blade flanges.  According to experts, the cutting depth will also be reduced if the saw components such as the blade guard and the motor housing extend below the diamond blade collars.

Do you prefer speed or life?

Ask yourself what’s more important for you, the initial price of the diamond blade or its cost per cut? For smaller jobs, you can always prefer to buy low-priced diamond blades. But if you intend to use the diamond place for a larger cutting job, then purchasing a higher-priced blade is a wiser choice since its cost per cut is lower than buying a low-priced diamond blade that won’t be able to properly perform the cutting job.

Do you intend to use wet cutting or dry cutting?

Most blades offered in the market are intended for dry-cutting, but these blades can also be used for wet-cutting. However, you must remember that diamond blades designed for wet-cutting can never be used for dry-cutting. This is because wet-cutting blades don’t have a coolant-aid design, unlike dry-cutting diamond blades. It’s the reason why wet-cutting blades require water as a coolant aid to avoid overheating.

Share This:
Facebook Twitter Plusone Pinterest Linkedin Stumbleupon Tumblr Email

Posted in: carbide blades, chainsaw blade, concrete blades, diamond blade, diamond tile saw

Comments For This Post

Videos

Oops, something went wrong.

Categories

Archives

Subscribe via Email

Enter your email address:

Delivered by FeedBurner


Subscribe in a Reader