The Gila Tools Turbo Diamond Hole Saws are professionally engineered to provide a fast cutting performance and long life. These supreme quality medium crown wall turbo core bits come with a 3/8" diameter carbide pilot drill bit for make drilling smooth precision holes very easy. The shank fits easily in all electric or cordless drills, 1/2-inch chucks. Drill depth 2". Diamond hole saws are intended for drilling on Granite, Marble, Porcelain and Ceramic Tiles. Use dry or wet.
- Intended for drilling on granite, marble,Ceramic tile, porcelain and similar materials
- Available in different sizes
- Ideal for electric or cordless drills with a 1/2-inch chuck
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
For proper size, seg width, seg height and arbor, view product table
- Arbor Size: 3/8" Shank
- Sizes: 1/4"-2-1/2"
- Material Cut: Granite, Marble, Porcelain and Ceramic Tiles.
Works with the following Manufacturer Models:
Bosch: 1191VSRK,HD19-2D, HD19-2, HD21-2, 18636-02, 18636-03, 18636-01, HDS180-02, HDH181-01, HDS181-02, HDB180-02, HDS180-03, HDS181-01, HDS181-03
Makita: HP1641K, HP1640, HP2050, HP2070F, HP2050F, HP2010N, LXPH03, LXPH05 LXPH01, BHP454, BHP452HW
Dewalt: DWE5010, DWD520K, DWD520, DWD525K, DW511, DW505K, DW505, DCD795D2 DCD985L2, DCD785C2, DCD775KL, DCD959KX, DCD950KX, DCD970KL, DCD930KX, DC725KA DC989KA, DC988KA, DC985KA, DC985VA, DC984KA, DC901KL
Milwaukee: 5376-20, 5380-21, 5387-22, 5387-20, 5381-20, 5381-22, 2602-22 2604-22, 2611-24, 2604-22ct, 2602-22ct, 0726-22
Ridgid: R5013 R5011, R8611501K, R861150
Metabo: SBE751, SBE1100, SBE710, SBE750, SB1, SB18 LT
Hitachi: DV16V, DV16VSS, DV20VB2, FDV16VB2, DV18DBL, DV18DL, DV18DSFL, DV18DVC
Ryobi: P212, D552HK
Craftsman: 10137, 28129, C3
Porter Cable: PC650HD, PC70THD, PC180CHDK-2
Panasonic: EY7950LS2S, EY7960LZ2S, EY7940LR2S