Thin Turbo Tile Blade

Be the first to review this product

Quick Overview

  • Segment Height: 8mm

  • Cutting Method: Wet

  • Application: Granite Tiles, Marble Tiles and Porcelain Tiles

  • Equipment Types: Angle Grinder and Wet Stone Cutter

Thin Turbo Tile Blade

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Availability: Out of stock

Item Number Size Seg.W. Seg.H. Arbor Price Qty
No options of this product are available.


The Gila Tools Thin Turbo Tile Diamond Blade is designed with zipper narrow teeth for a smooth cut.




  • Cuts Granite Tiles, Marble Tiles and Porcelain Tiles
  • Zipper narrow teeth for a smooth cut
  • Wet cutting only
  • Designed for the professional contractor




Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.


  • In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.

  • Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.


For proper size, seg width, seg height and arbor, view product table

  • Arbor Size:  7/8"-5/8"
  • Blade Diameter:   4"-5"
  • Material Cut:  All Types of Tile
  • Rim Type:  Continuous Rim





Works with the following Manufacturer Models:


Diamond Products: CC400T, CC600T

MK Diamond: MK-70

 Norton Saint Gobain: TC405

 QEP: 60084A, 21634


Gundlach: 410,


 Makita: 4101RH


 Ryobi: P580, TC400



* Use Gila Flush Mount Adapter for use with Angle Grinders


Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D


Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S


Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497


Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30


Ridgid: R1005, R1020


Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520


Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS


Ryobi: AG452K, AG402, AG700


Craftsman: 24544, 26438, 24543


Skil: 9296-01, 9295-01