The Gila Tools Super Sharp Glass Tile Diamond Blade is by far the highest rated best glass cutting tile blade in its class. This blade features a large quantity of very fine diamond chips around the rim to consistently give you smooth and chip-free glass cutting results at a high speed. This glass cutting blade is made from the highest quality materials to ensure the best performance in glass tile cutting and mosaic tile glass cutting, providing straight and true cuts without chipping, especially at the edges of the glass. Our glass blades boast of extreme durability and long-lasting blade life for wet use applications.
- Highest rated blade in the industry
- This blade features a large quantity of very fine diamond chips around the rim for a smooth chip free glass cutting at high speed
- Long lasting blade life
- Wet cutting only
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
For proper size, seg width, seg height and arbor, view product table
- Arbor Size: 7/8"-5/8"
- Blade Diameter: 7"-10"
- Material Cut: Glass/Mosiac Tiles
- Rim Type: Continuous Rim
Works with the following Manufacturer Models:
Husqvarna: TS60, TS250X3, TS250XL3
Diamond Products: CC400T, CC600T, CC900T, CC900TE, CC1000T
MK Diamond: MK-212-4, MK-212-6, TX-3, MK-101, MK-101-24, MK-101-PRO24, MK-101 PRO24-JCS, MK-100, MK-770EXP, MK-660, MK-370EXP, MK-370, MK-377, MK-170
Norton Saint Gobain: CTC102XL, TC405
Multiquip: TP24, TP24X
Imer: Combi 200VA, Combi 250VA, Touchdown TD-10, Combi 1000
QEP: 83230, 83200, 61024, 60084A, 21634, 60024
Gundlach: 1000JR, 1000SR 410,
Ridgid: R4030, R4020, R4007
Ryobi: WS721, WS730, WS750L
Craftsman: 22320, 21541