Gila Tools laser-welded Super Duty Fast Cut Blades are made from Hi-Grade diamond powder woth a proprietary bond that is engineered for maximum cutting performance. High diamond concentration is designed for extremely aggressive fast cutting that provides a superior blade life. Blade is designed with cross drilled holes for greater heat dissipation. Heavy steel core designed for long life.
- For use with 13-35HP Walk Behind Saws.
- Heavy steel core design for added strength
- High diamond content for fast cutting
- Great for dry and wet cutting
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
For proper size, seg width, seg height and arbor, view product table
- Arbor Size: 1in-20mm, 20mm
- Blade Diameter: 12"-24"
- Material Cut: Cured Concrete, Hard Brick/Block andStone
- Rim Type: Segmented
- Weld Type: Laser Welded
Works with the following Manufacturer Models:
Husqvarna: FS309, K3000wet, K3000vac, FS520, FS513, FS413, FS400, MS510G, FS524
Diamond Products: CC1310E3XL-20, CC1507E3-20, CC1875E1XL-P, CC1810E3XL-P, CC1875E1XL-S, CC1810E3XL-S, CC2515E-14, CC2515E-20, CC3520E-14, CC3520E-20, CC3530E-14, CC3530E-20, CC3725E-14, CC3725E-20, CC3730E-14, CC809H-20, CC809L-20, CC813H-20, CC813H-24
MK Diamond: MK-5009T, MK-5010S, MK-5010T , MK-5009G, MK-5010G, MK-5013G, MK-3020B, MK-2013HE, MK-2013HSP, MK-1610B Premium, MK-1610B Premium, MK-5009T, MK-5010S, MK-5010T , MK-5009G, MK-5010G, MK-5013G, MK-5010S, MK-5010T, MK-5010T, MK-5010T
Edco: SK-14-9H, SK-14-11H, SK-14-13H, SS-20-20H, SS-20-13H, SS-20-10B, SS-20-25P, SB-14-9H, SB-14-11H, SB-14-13H, BB-14-9H, GMS-20-9H, GMS-20-11H, GMS-20-13H,
Norton Saint Gobain: C3120SD, C3520SS, C2016SS, C2020SS, C2024SS, C1316SM, C1320SM, C1316SS, C1320SS, C3020ES, C2020ES, C1320P, C1318P, BBL13247,
CS Unitec: CSH 125, CSH 150, CSR 150
Wacker Nesonu: BFS914, BFS914A, BFS1318AB
Multiquip: SP118, SP213H20A, SP2S13H20A, SP2S20H20A, MP2H
Imer: 500 Block Head