Shark Turbo Blade

The Gila Tools Shark Turbo Blade is a super aggressive segmented turbo blade with specially designed "Shark Teeth Style" deep drop segments for under-cut protection. special vented core keep blade running cooler and also helps remove slurry for friction free cutting. This heavy-duty blade is can be used  for wet or dry cutting. For use with abrasive materials

• Super aggressive segmented turbo blade with specially designed "Shark Teeth Style" deep drop segments for under-cut protection.
• Special vented core keep blade running cooler and also helps remove slurry for friction free cutting.
• Features 4 Flash Holes for use with Gila Flush Mount Adapter.
• Blade intended for cutting on Granite, Marble, Stone, Travertine and Porcelain.
• Great for dry and wet cutting
• Designed for the professional contractor

Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.

• In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.


• Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.

For proper size, seg width, seg height and arbor, view product table

• Arbor Size:  7/8in-5/8inch, DM7/8in-5/8in, 1in-20mm, 7/8in-20mm-5/8in with Flush Holes, 50/60mm (Bridge Saw)
• Blade Diameter:   4"-14"
  
• Material Cut:  Granite, Marble, Porcelain, Travertine and Natural Stone
• Rim Type:  Continuous, Turbo
  

Works with the following Manufacturer Models:

Husqvarna: TS60, TS250X3, TS250XL3

Diamond Products: CC400T, CC600T, CC900T, CC900TE, CC1000T

MK Diamond: MK-212-4, MK-212-6, TX-3, MK-101, MK-101-24, MK-101-PRO24, MK-101 PRO24-JCS, MK-100, MK-770EXP, MK-660, MK-370EXP, MK-370, MK-377, MK-170

Edco: TMS-10-1.5L

Norton Saint Gobain: CTC102XL, TC405, CTC701, TC405

CS Unitec: EDS181

Multiquip: TP7X, TP24, TP24X

Imer: Combi 200VA, Combi 250VA, Touchdown TD-10

QEP: 83230, 83200, 60088, 22650, 61024, 60089, 60084A, 60083, 21634, 60024, 22500

Gundlach: 1000JR, 1000SR 410, 710, 1037, 1027

Bosch: TC10

Makita: 4101RH

Dewalt: D2400

Ridgid: R4030, R4020, R4007, R4010, R4090

Ryobi: P580, WS721, TC400, WS730, WS750L

Craftsman: 22320, 21541

* Use Gila Flush Mount Adapter for use with Angle Grinders

Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D

Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S

Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497

Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30

Ridgid: R1005, R1020

Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520

Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS

Ryobi: AG452K, AG402, AG700

Craftsman: 24544, 26438, 24543

Skil: 9296-01, 9295-01