Pro Dry Stone Core Bits

The Gila Tools Pro Dry Stone Core Bits are  impregnated with silicon carbide electroplated on the outside of tube ideal for beveling and eliminates pinching and heat build up. Laser-Welded individual segments  hold up under extreme heat and cutting pressure. Specially formulated supreme quality segments provide smooth and clean cutting in granite, marble, stone, tile, porcelain and similar materials. Full range of sizes for virtually any job.

• Intended for drilling on granite, marble, porcelain, artificial and natural stone.
• Impregnated with silicon carbide electroplated on the outside of tube.
• Ideal for beveling and eliminates pinching and heat build up.
• Available in different sizes
• Ideal for Angle Grinder and Waterfed Polisher with Max RPM 12,000 on dry or wet.
• Designed for the professional contractor

Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.

• In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.


• Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.

For proper size, seg width, seg height and arbor, view product table

• Arbor Size:  5/8in-11 Thread
• Sizes:   1"-1-1/2"
  
• Material Cut:  Granite, Marble, Porcelain, Artificial and Natural Stone
• Tube Length: 4"

Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D

Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S, 4114, 4101RH, PW5001C

Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497

Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30

Ridgid: R1005, R1020

Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520, 602050420

Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS, CM5SB, CM4SB2

Ryobi: AG452K, AG402, AG700

Craftsman: 24544, 26438, 24543

Skil: 9296-01, 9295-01

MK Diamond:  MK-L1506VR

Damo: DWP-1257

Alpha: AWP-158

Secco: WVPOLSET