Pro Cut Stone Blade

Gila Tools laser-welded Pro-Cut Stone Blade is designed with  the latest laser welding technology with high diamond concentration to  provide superior blade life and maximum cutting performance. This Blade are specially designed  with a Medium Soft Bond intended for cutting on Natural Stone, Granite, Marble and Cured Concrete.

• For use with Angle Grinder, Circular Saw, Gas Cut Off Saw, Masonry Saw and up to 13hp  Walk Behind Saw.
• High diamond concentration to  provide superior blade life and maximum cutting performance.
• Specially designed  with a Medium Soft Bond intended for cutting on Natural Stone, Granite, Marble and Cured Concrete.
• Great for dry and wet cutting
• Designed for the professional contractor

Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.

• In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.


• Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.

For proper size, seg width, seg height and arbor, view product table

• Arbor Size:  7/8"-5/8", 1"-20mm
  
• Blade Diameter:   4"-16"
  
• Material Cut:  Natural Stone, Granite, Marble and Cured Concrete.
• Rim Type: Segmented
  
• Weld Type: Laser Welded
  

Works with the following Manufacturer Models:

Husqvarna: FS309, K3000wet, K3000vac, FS513, FS413, FS400, MS510G,

Diamond Products: CG-1E15, CG-2E30, CC1310E3XL-20, CC1810E3XL-P, CC1810E3XL-S, CC2515E-14, CC2515E-20, CC3520E-14, CC3520E-20CC809H-20, CC809L-20, CC813H-20, CC813H-24

MK Diamond: MK-3020B, MK-3020B, MK-2013HE, MK-2013HSP, MK-2013SE, MK-2013SSP, MK-2013VSP, MK-2014K, MK-2020HSP*, MK-2024HSP*, MK-2022SSP*, MK-2025SSP, MK-1614K Standard, MK-1614K Premium, MK-1613S Standard, MK-1613S Premium, MK-1613V Standard, MK-1613H Standard, MK-1613H Premium, MK-1609H Standard, MK-1610B Premium,
MK-1610B Premium, MK-5009T, MK-5010S, MK-5010T, MK-5009G, MK-5010G, , MK-5013G, MK-5010S, MK-5010T, MK-5010T, MK-5010T

Edco: SK-14-9H, SK-14-11H, SK-14-13H, SS-20-20H, SS-20-13H, SS-20-10B, SB-14-9H, SB-14-11H, SB-14-13H, DS-18-13H, BB-14-9H, GMS-20-9H, GMS-20-11H, GMS-20-13H, MS-20-7.5

Norton Saint Gobain: C2016SS, C2020SS, C2024SS, C1316SM, C1320SM, C1316SS, C1320SS, C1320P, C1318P, BBL1347, BBL1327

CS Unitec: CSH 125, CSH 150, EDS181, CSR 150

Wacker Nesonu: BFS914, BFS914A, BFS1318AB

Multiquip: SP118, SP213H20A, SP2S13H20A, SP2S20H20A, MP2H

Imer: 500 Block Head

Unifire: PS-COS12, PS-COS14, PS-COS1464, PS-COS1479

Stihl: TS 480i STIHL Cutquik, TS 500i STIHL Cutquik, TS 700 STIHL Cutquik

Tempest Vent Master: 375K, 396K, 3120K

Cutters Edge: CE760, CE970

Dolmar: PC-7430, PC-7412, PC-7435, PC-7414

Makita: EK7301

* Use Gila Flush Mount Adapter for use with Angle Grinders

Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D

Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S, 4114, 4101RH

Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497

Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30

Ridgid: R1005, R1020

Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520

Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS, CM5SB, CM4SB2

Ryobi: AG452K, AG402, AG700

Craftsman: 24544, 26438, 24543

Skil: 9296-01, 9295-01