The Gila Tools Laser Welded 4-inch Masonry Diamond Core Bits are designed to hold up under extreme heat and cutting pressure. Barrel vents increase air flow to dissipate heat and cool the core bit. pecially formulated professional quality segments provide fast cutting and long life in a variety of materials including concrete, reinforced concrete, brick, block and masonry. Full range of sizes for virtually any job. Core Bit intended for drilling on a variety of soft brick and concrete block. NOT RECOMMENDED ON CONCRETE and REINFORCED CONCRETE.Use wet or dry. Core Bit ideal for Hand-Held Core Drill and Rig-Mounted Core Drill.
- Designed to hold up under extreme heat and cutting pressure.
- Barrel vents increase air flow to dissipate heat and cool the core bit
- Available in different sizes
- NOT RECOMMENDED ON CONCRETE and REINFORCED CONCRETE
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
For proper size, seg width, seg height and arbor, view product table
- Arbor Size: 5/8in-11 Thread
- Sizes: 3"
- Material Cut: concrete, reinforced concrete, brick, block and masonry.
- Tube Length: 4"
Works with the following Manufacturer Models:
Husqvarna: DS800, DMS340, DMS280, DM340, DM280, DMS240, DMS180, DM220, DM230
Diamond Products: M1AA-15, M-1, M-2, M-3, M-4, M-5, M-5 PRO, M-6, U.D.M., DK12, DK13, CB500-HH
MK Diamond: Manta III, Manta IV, MK-130/3, MK-2000P
Edco: 48" Drill Rig
Norton Saint Gobain: DR520, DR620, HHDET1800, HHD2ENT, HHDETOL, HHD3TOL
CS Unitec: END712P, END1521PC, EHD1300, EBM350/3PSA, EBM350/3PSV, EBM350/3P, 2 1317 0030, 2 1317 0030 SA, 2 1317 0030 SV, 2 1333 0010, 2 1335 0010, 2 1328 0050 SA
Multiquip: CDM1H, DM15A9C, DM4094, DM4096
Milwaukee: 4115-22, 4120-22, 4136
Steel Dragon: SDT180, SDT185, SDT250, SDT350, SDT85