The Gila Tools GT-I Turbo Cup Wheel is optimized for material removal and fine finishing on marble, granite, natural stone and other masonry materials. Aggressive swirl turbo segments leave little or no swirl marks.
- Optimized for material removal and fine finishing on marble, granite, natural stone and other masonry materials
- Aggressive swirl turbo segments leave little or no swirl marks
- Ideal for angle grinders and polishers
- Designed for the professional contractor
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
- Diamond Grit: Coarse
- Arbor/Equipment Type: 7/8”-5/8” for Floor Grinders.
- Arbor/Equipment Type: 5/8"-11 Threaded for Angle Grinders.
- Application: Granite, Marble and Natural Stone.