Ferrous Metal/Steel Saw Blades

Tailored specifically for contractors, the Gila Tools line of carbide tipped steel saw blades are specially designed to easily cut through a wide variety of ferrous metals. The grade of carbide used in our blades outlasts and outperforms ordinary carbide blades. The unique tooth design allows these blades to excel at cutting through many types of ferrous metals. Please refer to your machines owners manual to see if these blades are compatible. These blades also feature anti-friction coatings that reduce noise and vibration.

Features:

• Designed to cut metal Rods, Rebar, Steel Sheets, Steel Studs, Steel Pipes and more
• Special grade carbide teeth produces fast, clean cuts with minimal burrs
• Coating on the blade reduces friction and runs cool.

Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.

• In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.


• Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.

• Diameter:  4-3/8",  5-3/8",  6-1/2",  7-1/4",  8-1/4",  10", 1 2",  14"
• Machine Type:  Circular Saws, Chop Saws, Dry Cut Machines, and Cut Off Machines
• Application:  Ideal blade for cutting Metal Rods, Rebar, Steel Sheets, Steel Studs, Steel Pipes, etc.
• Teeth:  24, 40, 30, 60, 80
• Arbor:  5/8", DM 5/8", 1"
  
• Kerf:  1.6, 1.8, 2.0, 2.4, 2.6
  
• Hook Angle:

Works with the following Manufacturer Models:
 

Makita: BCS550, 4131, LC1230

Dewalt: DW872

Milwaukee: 2682-22, 6370-20, 6370-21, 6190-20
 
Ridgid: 614

Panasonic: EY3530NQMKW

Originalsaw: 3512-01, 3512-03, 3531-01, 3536-01, 3531-03

Marvco: 43149MC, 45349MC

Scheppach: 36K010

Jepson: 9435, 9430, 9410ND

Alfra: RD355