Electroplated Granite Blade

The Gila Tools Electroplated Granite Blade is designed for fast cutting of granite and similar materials. Electroplating technology keeps all diamond particles attached to segment plate and core without such assisting aggregates such as copper and steel thus making this product a chip-free cutting item. Exposed diamond particles gives 100% surface to surface contact. Diamonds on core provide a clean all through cut. An economic alternative to impregnated segmented blades.

• Designed for fast cutting of granite and similar materials.
• Electroplating technology allows for a chip-free cutting item
• Diamonds on core provide a clean all through cut
• Great for wet cutting
• Designed for the professional contractor

Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades

All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration.  All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.

• In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.


• Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.

For proper size, seg width, seg height and arbor, view product table

• Arbor Size:  7/8"-20mm-5/8"
  
• Blade Diameter:   4"-7"
  
• Material Cut:  Angle Grinder, Circular Saw and Tile Saw
• Rim Type:  Electroplated

Works with the following Manufacturer Models:

 Diamond Products: CC400T, CC600T

MK Diamond: MK-770EXP, MK-660, MK-370EXP, MK-370, MK-377, MK-170

 Norton Saint Gobain: CTC405, CTC701, TC405

CS Unitec: EDS181

Multiquip: TP7X

 QEP: 60088, 22650, 60089, 60084A, 60083, 21634, 22500

Gundlach: 410, 710,

 Makita: 4101RH

 Ridgid: R4030, R4020, R4007

Ryobi: P580, WS721, TC400, WS730, WS750L

Craftsman: 22320, 21541

* Use Gila Flush Mount Adapter for use with Angle Grinders

Bosch: 1375A, 1380SLIM, 1380SLIM-K, 1800, 1810PS, 1810PSD, 1801, 1811PS, 1811PSD, 1803EVS, 1821, 1821D, 1853-5, 1772-6, 1873-8, 1873-8D, 1974-8, 1974-8D

Makita: 4101RH, 9564CV, 9564P, GA4030K, GA4530, GA4534, 9015A, 9005B, 9558PB, 9565CV, 9565PC, GA5010Z, GA5020, GA5020Y, GA7001L, GA7011C, GA7020, GA7021, GA7031Y, GA7040S

Dewalt: DWE4011, D28402N, D28112, D28110, D28402, D28402K, DW802G, D28402W, D28114, D28114N, D28131, D28065, D28065N, D28115, D28115N, DW831, DW840, DW831, DWE4517, DWE4557, DWE4597N, DWE4597, D28499X, D28497

Milwaukee: 6146-33, 6147-30, 6147-31, 6121-31, 6117-33D, 6121-31A, 6117-30, 6117-31, 6088-31, 6089-30, 6089-31, 6088-30

Ridgid: R1005, R1020

Metabo: 6.00270.42, 6.00270.00, 6.06696.42, 6.06696.00, 6.06701.42,6.00259.42, 6.00259.85, 6.00264.42, 6.00264.00, 6.00263.42, 6.01101.42, 6.00274.42, 6.02131.42, 6.00281.42, 6.00281.00, 6.00292.42, 6.00269.42, 6.00304.42, 6.00166.42, 6.00322.42, 6.00279.42, 6.06711.42, 6.00267.42, 6.00268.42, 6.06250.42, 6.06418.42, 6.06445.42, 6.02170.86, 6.02170.52, 601119520

Hitachi: G12SA3, G12SE2, G12SE2P9, G12SN, G12SR3, G12SS, G12VA, G13SC2, G13SC2P9, G13SN, G13SP, G13VA, G18DL, G18MR, G18MRP9, G18SCY, G18SR, G18SS

Ryobi: AG452K, AG402, AG700

Craftsman: 24544, 26438, 24543

Skil: 9296-01, 9295-01