Keeping your saw blades in good condition will not only save you money in purchasing these power tools but it will also produce impressive results on cutting materials. Maintaining the saw blade is necessary to make it work properly. There are easy ways to do these and here are some which you can do right in the comfort of your own home.

Reversing the blade is an effortless way to maintain the quality of the saw blade. Even for diamond blades, reversing the blade will assure that the wear is equally distributed and not concentrated on just one side of the blade. Do this occasionally. When glazing begins to appear, clean it by cutting into a soft abrasive material to exfoliate and get rid of any surface glaze on the saw blade.

Lubricating the blade is another way to extend the shelf life of the saw blade. Doing so will prevent overheating which could potentially damage the saw blade, resulting in rough surfaces on cutting materials. The right lubricant should be applied on a specific saw blade and make sure to be generous with it. Lubricants can easily be purchased from local hardware stores and experts can provide with the right product for the saw blade to provide smoother action.

There are many saw blades available from diamond-cutting solutions providers. Make sure to use the right one for the specific material you are cutting. There are general purpose saw blades while there are those manufactured for specific surfaces such as asphalt, porcelain, tile, and ceramic.

Using the wrong blade can damage it, for example, using a saw blade that isn’t strong enough to cut through brick or concrete. Maintaining saw blades should be done on a regular basis. This is to ensure maximum performance while also extending its shelf life to save you money in the long run.

Share This:
Facebook Twitter Plusone Pinterest Linkedin Stumbleupon Tumblr Email

Posted in: concrete saw blades, concrete saw maintenance tips

Comments For This Post

Leave a Comment

Categories

Archives

Subscribe via Email

Enter your email address:

Delivered by FeedBurner


Subscribe in a Reader