Brick pavers are a highly used fixture in residential and commercial buildings particularly for landscaping purposes. Not only are they the less expensive choice, they are, more importantly, durable even under extreme circumstances; and because are made from natural clay, they are certainly environment-friendly.


Image credit:

A popular outdoor setup for homes is a patio and it’s one that would benefit loads from brick pavers. You may need help in building an entire patio but you can save a whole lot of time by doing the cutting of brick pavers by yourself.

It’s easy.

There are many tools you can use to cut brick pavers, but a good diamond blade fitted to a hand-held circular saw should be more than good enough. In fact, it is the best choice out there especially for a DIYer as the diamond blade will allow for a smooth and effortless cut.

  1. Be sure you have the right kind of diamond blade affixed into the circular saw. To be sure, you can always ask your local store personnel.
  2. To make sure you won’t cut our work surface, see to it that the cutting depth of the circular saw is ¼ inch less than the thickness of the paver.
  3. Using a ruler and a writing material, measure the paver and put markers on where it is to be cut.
  4. Now turn the circular saw on and do the cutting. Remember to start slowly and follow the markings you did. Carefully power down, and when you’re done, check the brick if it is cut perfectly as needed.

Image credit:

Yes, it’s that easy. Of course, as with any project, don’t forget to put on safety gears. You need them even if it is just a simple DIY work. Until next time, please keep to this website.

Share This:
Facebook Twitter Plusone Pinterest Linkedin Stumbleupon Tumblr Email

Posted in: diamond blade

Comments For This Post

paving company Jul 21, 2014, 3:46 pm

This is very informative. Thanks for sharing. Do you need to use a wet saw?


Oops, something went wrong.



Subscribe via Email

Enter your email address:

Delivered by FeedBurner

Subscribe in a Reader