Gila Tools saw blades are the highest performance saw blades specifically designed for the woodworker. Its superior blade design produces fast and clean cuts in a variety of materials. The Gila Tools saw blades contain high quality carbide for a cutting life that is 2x longer than that of standard blades.
- Produces grooves from 3/16" to 13/16"
- All blades and chippers comes with Gila Tools anti kick back design
- Features high quality dense carbide for maximum cross cutting performance
- Recommended for cutting softwood, hardwood, plywood, chipboard, laminate
- (2) 8-inch 24T Dado Blades
- (5) Twin Tooth Chippers Shim Set
- Carrying Case
Gila Diamond Products Warranty pertaining to all Diamond Cutting Tools and Carbide Blades
All Gila Diamond Products are engineered and manufactured to the highest of standards. Your satisfaction is a dominant consideration. All Gila Diamond Products are warranted to be free from defects in material and/or workmanship, provided that the tools are properly maintained and there is no evidence of abuse or misuse.
- In the event of failure or malfunction, return the product, properly packaged and postage prepaid, to Gila Diamond Products. You may also contact Gila Diamond Products at (888) 850-0889 for instructions on returns and technical advice.
- Gila Diamond Products assumes no liability for defects or damage caused by abuse or misuse of any product or unauthorized service of any product. The product must have been used for its recommended purpose and not modified by sharpening or other changes. Normal wear and tear is not covered under Gila Diamond Products warranties.
Dado blade set contains (1) left outside edge carbide tip saw blade, (1) right outside edge carbide tip saw blade, (4) 1/8'' twin tooth chippers, (1) 1/16'' twin tooth chipper, and (5) shims. Heavy-duty wood storage box. Cuts smooth dados (grooves) from 1/8" to 13/16". Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material. Splinter-resistant cuts in softwood, hardwood, plywood, chipboard, laminate, etc.
Compatible with the following table saws.
Bosch: 4100, 4100-09, 4100DG-09, GTS1031
Dewalt: DW745, DW744X
Porter Cable: PCB220TS, PCB270TS
Jet: 708675PK, 708674PK, 708677PK, 708676PK, 708679PK, 708678PK, 708492K, 708493K, 708494K, 708495K
Ridgid: R4510, R4512
Ryobi: RTS10, RTS20, RTS30,
Skil: 3410, 3310
Powermatic: 1720305K, 1791229K, 1791230K, 1792000K, 1792001K, 1792002K, 1792003K, 1792005K, 1792006K, 1792007K, 1792008K, 1792010K, 1792011K, 1792012K, 1792013K, SLR12
Delta: 36-L336, 36-L352, 36-L552, 36-L552LVC
Sawstop: PCS31230-PF30, PCS31230-TGP252, PCS175-TGP252, PCS31230-TGP236, PCS175-TGP236, PCS175-PFA30, CNS175-TGP36, CNS175-SFA30, CNS175-TGP52
Grizzly: G0713, G0661, G1023RL, G1023RLW, G1023RLX, G0691, G0690, G1023RLWX, G0652, G0623X3, G0651, G0715P, G0623X, G0623X, G0700, G0696X, G0697X, G0606X1, G0605X1, G0699, G0588, G0674, G0493, G0501, G0502, G0732, G0524
Steel City: 35637, 35990C, 35990G, 35960, 35965GR, 35965, 35960GR, 35970, 35970GR, 35975, 35975GR, 35990CS, 35975G, 35950G, 35990CG, 35950, 35926, 35955, 35955G
Craftsman: 21807, 21833, 34972, 28463, 28461, 21829, 21828, 22116